gigahertz-solutions Gigahertz Solutions MK10 case for detecting electrosmog

Simple electrosmog analysis Analyze your personal electrosmog exposure yourself with the high and low frequency measuring devices! Benefit from the common advantages of the two high-quality measuring instruments, which are included in this set at a special price. So you can measure and estimate your personal stress situation. The devices are easy to use, even for laymen, and allow you to compare them with reference values and recommendations from the field of building biology. After measuring the load, you can determine suitable remediation measures and continue to observe and control them. Both devices contained in the case set are easy to use, even for laymen. Since high and low frequency occur independently in the environment and can have different effects on the body, it makes sense to measure and evaluate both separately. High and low frequency measuring instruments in practical case setThe included measuring instruments measure electric or magnetic alternating fields, the so-called "electrosmog". This is caused, for example, by the electricity grid in a house or apartment, connected devices and, above all, high-voltage lines, transformer houses and the like. Technical data HF32D high frequency analyzer:

• Frequency range: 800 MHz - 2.7 GHz
• Measuring range (digital display): Power flux density: 1 - 1999 µW/m²
• Accuracy: Basic accuracy including linearity error: +/- 6 dB
• Zero offset and special digitization error ("rollover"): +/- 9 digits
• Sensor: Logarithmic-periodic measurement antenna
• Audio analysis: Sound signal proportional to field strength (with "Geiger counter effect", can be switched on)
• Power supply: 9-volt E-block alkaline manganese battery (included in delivery), average operating time: 10 -12 hours (depending on operating mode)
• Low battery indicator, Auto power-off function
• Signal evaluation: Peak value display
• Other: Two years warranty
• Weight: 0.44 kg
• Measuring instrument:
• Plug-on LogPer antenna with antenna cable
• Alkali manganese battery
• Detailed operating instructions with neutral background information

A field strength proportional sound signal with "Geiger counter effect" helps to find areas with increased load.Technical data low frequency analyzer ME3030B:

• Frequency range: 16 Hz - 2 KHz (compensated, better than -2 dB).
• Measuring range: Magnetic flux density (one-dimensional): 1 - 1999 nT
• Electrical field strength: 1 - 1999 V/m
• Accuracy: +/- 2 %, +/- 14 digits @ 50/60 Hz
• Sensor: E-field sensor for electric AF alternating fields
• H-field sensor for magnetic NF alternating fields (one-dimensional)
• Audio analysis: Sound signal proportional to field strength (with "Geiger counter effect", can be switched on)
• Power supply: 9-Volt E-block alkaline manganese battery (included), average operating time: 24 to 36 hours (depending on operating mode)
• Low battery indicator, Auto power-off function
• Signal evaluation: RMS
• Other: Two years warranty
• Weight: 0.33 kg
• Measuring instrument:
• Grounding cable
• Alkali manganese battery
• Detailed operating instructions with neutral background information.

A sound signal proportional to field strength with "Geiger counter effect" helps to find areas with increased load.With the electrosmog measuring case MK10 you get:

• 1 Measuring device HF32D
• 1 Measuring instrument ME3030B including accessories
• in compact plastic case.

Weight: 1,24 kg